Products

KGS E 1670 S- Signal

• For single-phase AC only (50 Hz)
• Rigid and compact die-cast aluminium construction
• Suitable for accurate cuts on work-pieces up to 300 mm wide in wood and materials of a similar nature in plastics and in non-ferrous metals
• Depth-of-cut limitation feature. Thus also suitable for cutting grooves
• Guide carriage running on ball bearings to allow easy horizontal movement of sawhead. The carriage can be locked in place when cutting through narrow material
• Sturdy universal motor with ample power in reserve
• Low noise through the 2-step toothed belt drive
• Tungsten carbide-tipped 42 tooth saw blade with negative rake angle
• Spindle lock for easy saw-blade change
• Two-part inner guard that opens automatically on moving the sawhead down
• Turntable which can be swivelled steplessly to either side by up to 45°, with machined locations for the mitre angles of 15°, 22.5°, 30° and 45°
• Sawhead which can be tilted by up to 45° to the left
• Compound mitres can be cut by both swivelling the turntable and tilting the sawhead
• Vario-Tacho-Constamatic (VTC) full-wave electronic speed control and speed stabilization, which allows selection of the most suitable speed for the material and the operation concerned. Feedback from an integral tachogenerator holds the speed constant between no load and rated load
• Electronic starting-current limitation for use with any normal fused household power supply
• Electronic soft start
• Reduced speed cuts idle noise
• Electronic winding-temperature monitoring. Flashing signal in the event of imminent overload
• Auto-stop feature to stop the motor when the carbon brushes are excessively worn
• Metabo S-automatic safety clutch
• Efficient extraction of the sawdust at three points of the machine (with the aid of an extraction unit)
• Sawdust-tested by FPH in compliance with TRG 553
• The machine weighs so little and is so compact that it can easily be transported in the boot of a car
• Torque 11 in-lbs

• Max. width of cut 300 mm
• Saw-blade diameter 210 mm
• Rated input 1.6 kW
• Output power 0.95 kW
• No-load speed 2000-4000 rpm
• Speed at rated load 4000 rpm
• Connection for sawdust extraction dia. 58 mm
• Base dimensions 460 x 310 mm
• Weight 14.5 kg